多晶硅锭中硬质点分析及控制研究

以多晶硅锭中硬质点为研究对象,通过实验研究和数值模拟的方法,对多晶硅锭中硬质点进行形貌和成分分析,并提出改善控制方法。研究结果表明硅锭中部的硬质点较细小,主要由SiC组成;硅锭头部的硬质点较粗大,主要由SiC和Si3N4组成,还有少量O的存在。进一步研究发现多晶硅定向凝固铸锭炉的热场结构对于多晶硅锭硬质点形成有直接影响,通过改进热场结构,优化晶体生长界面,显著减少了铸锭中硬质点的数量。     

高压下CL-20拉曼光谱和红外光谱相变研究

为了更好地认识和了解CL-20晶体结构演变规律和相变行为,利用金刚石对顶砧超高压实验技术,在0~50GPa下,研究了高压下ε-CL-20的原位拉曼光谱和红外光谱。结果表明,CL-20晶体在整个加压过程中存在两个相变,第一个相变发生在4.2~7.5GPa,认为是ε相到对称性更低的γ相转变,相变产生的原因是在压强的作用下,笼环外的硝基方向发生改变,电子云密度重置导致的分子构型转变;第二个相变发生在14.2~18.9GPa,属于γ相到ζ相的晶体结构转变;卸压后,拉曼和红外光谱恢复常压状态,表明CL-20晶体在研究压强范围内的相变过程是可逆的。     

智能温度测量系统设计

以AT89C52单片机作为微控制器，设计了一个智能温度测量系统。该系统通过DS18B20温度传感器实现环境温度的采集和A/D转换，模数转化后的电信号送入AT89C52单片机，再通过单片机将其送入LCD1602数码管进行显示。通过实验结果可以看出，相比较传统的温度采集方法，该系统能够快速准确地检测温度，并且检测精度可以达到0.1 ；同时，该系统具有过温点设定值调节及温度上下限蜂鸣提示的优点。     

Effect of element Ru on microstructure and creep behaviour of single crystal nickel-based superalloy

By means of creep property measurement and microstructure observation, the influence of element Ru on the microstructure and creep behaviour of single crystal nickel-based superalloy is investigated. The results show that the plate-like μ phase is precipitated along {111} plane of the Ru-free alloy during thermal exposure at 1080°C and creep at 980°C. And the precipitation of μ phase in the alloy with 6(wt)%Mo and 6(wt)%W may be restrained by adding 2% Ru element. Compared to Ru-free alloy, the creep life of the 2% Ru single crystal alloy at 980°C200 MPa increases form 123 h to 333h. Compared to the 2% Ru alloy, the precipitated plate-like μ phase in the Ru-free alloy may promote the initiation and propagation of cracks along the γ matrix up to fracture, which is thought to be the main reason of the alloy having a lower creep resistances and shorter lifetime.     

Grain growth kinetics and growth mechanism of columnar Al2O3 crystals in xNb2O5–7.5La2O3-Al2O3 ceramic composites

xNb₂O₅–7.5La₂O₃-Al₂O₃ ceramic composites with in-situ-grown columnar Al₂O₃ crystals were successfully prepared by microwave sintering at 1450–1525?°C using α-Al₂O₃, Nb₂O₅, and La₂O₃ powders as raw materials. X-ray diffraction results indicated that the main phases were Al₂O₃, LaNbO₄, and Nb₂O₅ in the prepared samples. A field emission scanning electron microscope (FESEM) showed that the Al₂O₃ crystals appeared as columnar in the structure. Moreover, the grain size of the columnar Al₂O₃ crystals increased with the Nb₂O₅ content. The ratio of the major axis to the minor axis of the crystals was largest when the Nb₂O₅ content was 15?vol%. Furthermore, the grain-growth kinetics index (n), growth activation energy (Q), and growth mechanism of the columnar Al₂O₃ crystals were studied. The results indicated that the Nb₂O₅ addition could promote formation and growth of columnar Al₂O₃ crystals, and the grain-growth activation energy indicated that the dissolution process controls the crystal growth. The growth mechanism of the columnar Al₂O₃ crystals was also studied. The present work demonstrated that Nb₂O₅ is a good additive for the preparation of Nb₂O₅–7.5La₂O₃-Al₂O₃ composite ceramics with columnar Al₂O₃ crystals.     

An Artificial Nocturnal Flower via Humidity‐Gated Photoactuation in Liquid Crystal Networks

Beyond their colorful appearances and versatile geometries, flowers can self‐shape‐morph by adapting to environmental changes. Such responses are often regulated by a delicate interplay between different stimuli such as temperature, light, and humidity, giving rise to the beauty and complexity of the plant kingdom. Nature inspires scientists to realize artificial systems that mimic their natural counterparts in function, flexibility, and adaptation. Yet, many of the artificial systems demonstrated to date fail to mimic the adaptive functions, due to the lack of multi‐responsivity and sophisticated control over deformation directionality. Herein, a new class of liquid‐crystal‐network (LCN) photoactuators whose response is controlled by delicate interplay between light and humidity is presented. Using a novel deformation mechanism in LCNs, humidity‐gated photoactuation, an artificial nocturnal flower is devised that is closed under daylight conditions when the humidity level is low and/or the light level is high, while it opens in the dark when the humidity level is high. The humidity‐gated photoactuators can be fueled with lower light intensities than conventional photothermal LCN actuators. This, combined with facile control over the speed, geometry, and directionality of movements, renders the “nocturnal actuator” promising for smart and adaptive bioinspired microrobotics.     

Strain rate and orientation-dependent strain hardening of Mg–9Li–Al using crystal plasticity

A crystal plasticity finite element model was proposed considering slip and twinning interactions. The grain morphology and crystallographic orientations were introduced into the model to describe the microstructure of duplex polycrystalline Mg–9Li–Al. The activation of the slip systems and the strain localisation with respect to initial grain orientations were investigated. In addition, the effects of phase distributions and volume fractions on the macroscopic responses and on strain hardening rates were analysed. The results show that the strain hardening is rate-dependent but the texture is less sensitive to strain rate. The distribution of a phase and its volume fraction play primary roles in governing the mechanical response.     

What is a crystal to the new chemical crystallographer,after that first,automated structure analysis?

This educational review postulates the importance of maintaining an adequate level of crystallographic education among structure-dependent scientists whose interests are not primarily in crystallography, at a time when automation and validation have made it possible to obtain high-quality structure analyses in many cases with a minimum of crystallographic background. The topics addressed are intended to form a second round of crystallographic education for a novice user whose first round involved hands-on experience with structure solution and an introduction to elementary concepts. The specific topics, chosen for their relevance as basic knowledge and their lack of emphasis in many formal treatments, are (1) crystallographic reference frames and the utility of the reciprocal cell in geometrical calculations; (2) the relationship between the two concepts that constitute our model of the crystal, namely the unit cell and the lattice; (3) the manner in which an atom is represented in concept and in practice; (4) the importance of interleaved symmetry elements required by the presence of additional symmetry on a lattice; (5) the harnessing of the natural properties of the crystalline state for the potential manipulation of properties of synthetic crystals; and (6) useful terminology for navigating a crystal structure.